· Passive Video Transceiver Balun
· BNC Male to Terminal Block
· Built-in Surge Protection

· Transmits a full motion monochrome video signal up to 600 meters, color video signal up to 400 meters
· Distance Up to 1km when used with an active receiver such as TTA111VH, TTA111V,AV, TTA414VR, TPA008, TPA016
· Passive, No power required
· Built-in surge protection
· Eliminates Coaxial Cable

· BNC male to 2 pin Screw Terminal Block
· Video Input (BNC Connector) 1V p-p, 75 Ohms
· Transient Voltage Suppressors Clamping voltage: 6.8V
· Dimensions W x H x D 69x25x22mm
· Weight 40g

· Passive Video Transceiver Balun
· BNC Male to Screw Terminal Block
· 18cm Retractile Cord for PTZ Cameras
· Weatherproof IP65

· Designed for CCTV signal transmission over unshielded twisted pair wire (CAT5)
· An alternative solution to coaxial and fiber based systems
· Passive Video Transceiver (no power required)
· Perfect for camera with pan-tilt turning device

· BNC male to 2 pin Screw Terminal Block
· Weather Proof IP65
· Transmission range: color 400 meters, B/W 600 meters via CAT 5 UTP Cable
· Video Transceiver with 18cm Retractile Cord

· Passive Video Transceiver Balun
· BNC Male to Screw Terminal Block
· 25cm Mini Coax Cable
· Weatherproof IP65
· Compact Size

· Video Transceiver With 25cm Mini Coax Cable
· Designed for CCTV signal transmission over unshielded twisted pair wire (CAT5)
· An alternative solution to coaxial and fiber based systems
· Passive Video Transceiver (no power required)

· BNC male to 2 pin Screw Terminal Block
· Weather Proof IP65
· Transmission range: color 400 meters, B/W 600 meters via CAT 5 UTP Cable
· Compact size, perfect to connect with the image processor, which have multi BNC connections, as like Multiplexer, Quad, DVR etc.

· Passive Video Transceiver Balun
· Interference Rejection
· BNC Male to Screw Terminal Block
· 25cm Mini Coax Cable
· Weatherproof IP65
· Compact Size

· Immune to Interference from: Data Signals, Video Signals, Nearby Power, Ringing Telephones, Fluorescent Lights, Transformers, and more...
· Video Transceiver With 25cm Mini Coax Cable
· Designed for CCTV signal transmission over unshielded twisted pair wire (CAT5)
· An alternative solution to coaxial and fiber based systems
· Passive Video Transceiver (no power required)

· BNC male to 2 pin Screw Terminal Block
· Weather Proof IP65
· Transmission range: color 400 meters, B/W 600 meters via CAT 5 UTP Cable
· Compact size, perfect to connect with the image processor, which have multi BNC connections, as like Multiplexer, Quad, DVR etc.

· Passive Video & Power Transceiver Balun
· BNC Male to RJ45 Female
· Remote Power via "3 pairs" for Longer Range
· AC 24V

· Video (one pair) and remote power (3pairs) transmission over one 4pairs CAT5 cable.
· Transmission range up to 300 meters (max.)
· BNC for video, power cord for power, RJ45 female output for video and power.
· Eliminates costly coaxial cables and minimize installation time.

· Video (BNC Connector) : 1 (1V p-p, 75 Ohms)
· Transmission Interface: RJ45
· Weight: 70g
· Dimension W x H x D: 69x25x22 mm

· Passive Video & Power Transceiver Balun
· Built-in AC to DC 12V Power Converter
· Built-in switch to set unit for 2 pair or 3 pair "power through mode"
· For DC12V Camera use

· Video (one pair) and remote power (2 or 3 pairs) transmission over one 4pairs CAT5 cable.
· Built in AC to DC12V regulated power converter, 1000mA max.
· Built in switch to set unit for "2 pair power through" or "3 pairs power through" mode.
· For DC12V camera use, the power sources convert from TPP016VPD AC24V power for professional CCTV Industry Installation.
· Transmission range up to 300 meters (max)

· Cable Twisted Pair CAT5 (AWG24)
· Input Power AC20~28V; DC16~30V
· Output Power DC12V Regulated
· Output Current 1000mA (max)
· Weight 200 g
· Dimension W x H x D 87x67x27 mm

· Passive Video, Power, & Data Transceiver Balun
· Video, Low Voltage Camera Power, & Data Transmission over 1 CAT5 Cable
· Push Pin Terminal

· Passive Video Transceiver (no power required), transmission range color 400 meters, B/W 600 meters via CAT 5 UTP Cable.

· Male BNC with DC Plug+2 pin pigtail to 6 "push pin" terminal
· Push pin terminal for easy cable connection.
· Video, low voltage camera power, Data (RS422, 485) transmission over one standard CAT 5 cable.

· Passive Video, Power, & Data Transceiver Balun
· Video, Low Voltage Camera Power, & Data Transmission over 1 CAT5 Cable
· RJ-45 Terminal

· Passive Video Transceiver (no power required), transmission range color 400 meters, B/W 600 meters via CAT 5 UTP Cable.

· Male BNC with DC Plug+2 pin pigtail to RJ-45 terminal
· RJ-45 terminal for easy cable connection.
· Video, low voltage camera power, Data (RS422, 485) transmission over one standard CAT 5 cable.

· Passive, Video Transceiver Baluns

· Using CAT5 networking cable to transmit a full motion color amera video signal to 400 meters, B/W up to 600meters.
· Passive, no power required.
· Eliminate coaxial cable.
· Fast, easy installation, saving time and money.
· Substantial savings on the cost of the cable itself.

Contains:
· TTP111VT Video Transceiver BNC male to Terminal Block
· TTP111VL Video Transceiver With 25cm Mini Coax Cable

· Passive, Video & Power Transceiver Baluns

· Transmit video and power over one CAT5 networking cable.
· Eliminate coaxial cable.
· Fast, easy installation, saving time and money.
· Substantial savings on the cost of the cable itself.

Contains:
· TTP111VP Video Transceiver BNC male to RJ45 Female With Power Cord (DC Plug)
· TTP111VPJ Video Transceiver BNC male to RJ45 Female With Power Cord (DC Jack)
· Send power over UTP cable, application for low voltage power camera

· Passive, Video & Power Transceiver Baluns

· Transmit video and power over one CAT5 networking cable.
· 6 pin terminal connector for easy connection.
· Power cable could be one/two/three pairs option based on camera power consumption and transmission range.
· Substantial savings on the cost of the cable itself.

Contains:
· TTP111VP-T Video Transceiver BNC male to 6 pin Terminal connector With Power Cord (DC Plug).
· TTP111VPJ-T Video Transceiver BNC male to 6 pin Terminal connector With Power Cord (DC Jack).
· Send power over UTP cable, application for low voltage power camera

· Passive, 4 Channel Video Transceiver

· One CAT5 cable to send 4 video signals instead of coaxial cable.
· Passive Video Transceiver (no power required), transmission range color 400 meters, B/W 600 meters via CAT 5 UTP Cable.
· Perfect for 4 cameras to Hub CCTV Distribution Application

· 4 x BNC female to 1 x RJ45 female + 8 pin terminal block.
· Four passive transceivers in one unit.
· Choice of RJ45 or push pin terminal inputs/outputs.

· Active, Video, Audio, & Data Twisted Pair Transmission

· Active Video Transceiver (power required), transmission range color 1500 meters, B/W 2400 meters via CAT5 UTP cable.

· Transmit video, audio and data signal (RS422, RS485).
· Three position range switch for gain select on transmitter.
· Five position distance range switch on Receiver, brightness adjustment, two video output.
· Built in transient protection and ground lifting.

· Active, Video Twisted Pair Transmission
Contains:
SEE-TTA111VT and SEE-TTA111VR

· Active Video Transceiver (power required), transmission range color 1500 meters, B/W 2400 meters via CAT5 UTP cable.

· Three position range switch for gain select on transmitter.
· Five position distance range switch on Receiver, brightness adjustment, two video output.
· System is integrated with alarm sensor (PIR, Magnetic, etc...) or RS485/422 data
· Built in transient protection and ground lifting.

· Active, Video Twisted Pair Transmission

· Active Video Transceiver (power required), transmission range color 1500 meters, B/W 2400 meters via CAT5 UTP cable.

· Three position range switch for gain select on transmitter.
· Five position distance range switch on Receiver, brightness adjustment, two video output.
· System is integrated with alarm sensor (PIR, Magnetic, etc...) or RS485/422 data
· Built in transient protection and ground lifting.

· Active, Long Range Video Receiver
· Video and Data Receiver
· Built in Ground Loop Isolation

· Perfect to maintain good quality picture for long-range transmission with DVR
· Easy setting with 2 adjustments for color gain and brightness.
· Built in transit protection and ground lifting.

· Dual Power: DC12V, AC24V
· Transmission range from 100 meters to 1200 meters as passive transmitter.
· Transmission range from 100 meters to 1200 meters as active transmitter.

· Active Receiver with Extra Interference Rejection

· Perfect to maintain good quality picture for long-range transmission with DVR
· Active Video Transceiver ( power required), transmission range color 1500 meters, B/W 2400 meters via CAT5 UTP cable.
· Using two sets TTA111VT+TTA111VH for series connection, range up to 2.4Km(Color), 3Km(B/W).

· Built in a highly balanced mode of video transmission for extra interference immunity.
· HF,MF,LF compensation for color gain and adjustable brightness & contract for cleaner, sharper looking picture.
· Built in Input Impedance, Balance, Liner Gain adjustment.
· Built in Surge Protection.

· Active, 4 Channel Receiver

· Active Video Transceiver (power required), transmission range color 1500 meters, B/W 2400 meters via CAT5 UTP cable.

· Built in 4 port active receivers.
· Built in a highly balanced mode of video transmission for extra interference immunity.

· Passive, 16 Port Video & Data Transceiver Hub in 1U Rack Mounting Panel

· As a rack mounting passive transmitter hub, use with active receiver at distance up to 1000 meters.
· Built in a highly balanced mode of video transmission for extra interference immunity.

· Video Input Port: 16 Port (Terminal Block)
· Data Input Port: 1 Port (Terminal Block)
· Video Output Port (BNC Connector): 16 Port, 1Vp-p, 75 ohms
· Data Output Port: 16 Port (Terminal Block)
· Recommend Cable: CAT 5 Cable 4 Pairs (24 AWG)
· Operating Temperature:-20 ¡ã70¢X
· Dimension W x H x D: 482x105X44 mm (1U)
· Weight: 1400g

· Passive, 16 Port Video Transceiver Hub Built in Ground Loop Isolator

· As a rack mounting passive transmitter hub, use with active receiver at distance up to 1000 meters.
· Built in a highly balanced mode of video transmission for extra interference immunity.
· Built in Hi Performance Ground Loop Isolator at each channel.
· Low video loss, Bandwidth: 20hz -11Mhz ,+0/-3Db
· Prevents video-signal distortion caused by video ground loops
· Eliminates picture tearing, cross talk and rolling
· Prevents power cables laid by others interfering with the CCTV system

· Video Input Port: 16 Port (Terminal Block)
· Video Output Port (BNC Connector): 16 Port, 1Vp-p, 75 ohms
· Insertion Loss < 0.5dB
· Bandwidth :20Hz -11MHz, +0/-3dB
· Input and Output Resistance: 75 ohm
· Ground loop rejection >90dB @>50Hz
· Isolation Voltage: 600VDC (Min)
· Insulation Resistance: 100m Ohm
· Transient Voltage Suppressors: 12 Vrms
· Weight: 3500g

· Active, 8 Port Receiver Hub In 1U Rack Mounting Panel

· Built in 8 port TTA111VR active receivers in 1U 19 rack mounting panel
· Built in a highly balanced mode of video transmission for extra interference immunity.
· Built in transient protection and ground lifting

· Video Input Port :8 Port (Terminal Block)
· Video Output Port (BNC Connector): 8 Port, 1Vp-p, 75 ohms
· Power Input DC12V
· Power Consumption: 400mA
· Recommend Cable: CAT 5 Cable 4 Pairs (24 AWG)
· Dimension W x H x D mm: 482x170X44 (1U)
· Weight: 2200 g
· Material: Metal Black

· Active, 8 Port Receiver Distribution Amplifier In 1U Rack Mounting Panel

· Built in 8 port TTA111VR active receivers in 1U 19 rack mounting panel
· 8 input (UTP screw-terminal input) to 16 output (BNC)
· Built in surge protection
· Built in a highly balanced mode of video transmission for extra interference immunity.
· Perfect to work with DVR

· Video Input Port :8 Port (Terminal Block)
· Video Output Port (BNC Connector): 16 Port, 1Vp-p, 75 ohms
· Power Input DC12V
· Power Consumption: 400mA
· Recommend Cable: CAT 5 Cable 4 Pairs (24 AWG)
· Dimension W x H x D mm: 482x170X44 (1U)
· Weight: 2200 g
· Material: Metal Black

· Active, 16 Port Receiver Hub In 1U Rack Mounting Panel

· Built in 16 port TTA111VR active receivers in 1U 19 rack mounting panel.
· Built in a highly balanced mode of video transmission for extra interference immunity.
· Built in transient protection and ground lifting

· Video Input Port :16 Port (Terminal Block)
· Video Output Port (BNC Connector): 16 Port, 1Vp-p, 75 ohms
· Power Input DC12V
· Power Consumption: 500mA
· Recommend Cable: CAT 5 Cable 4 Pairs (24 AWG)
· Dimension W x H x D mm: 482x170X44 (1U)
· Weight: 2720 g
· Material: Metal Black

· Active, 16 Port Receiver Distribution Amplifier In 1U Rack Mounting Panel

· Built in 8 port TTA111VR active receivers in 1U 19 rack mounting panel
· 16 input (UTP screw-terminal input) to 32 output (BNC)
· Built in surge protection
· Built in a highly balanced mode of video transmission for extra interference immunity.
· Perfect to work with DVR

· Video Input Port :16 Port (Terminal Block)
· Video Output Port (BNC Connector): 32 Port, 1Vp-p, 75 ohms
· Power Input DC12V
· Power Consumption: 500mA
· Recommend Cable: CAT 5 Cable 4 Pairs (24 AWG)
· Dimension W x H x D mm: 482x170X44 (1U)
· Weight: 2720 g
· Material: Metal Black

· Active, UTP 1 in 2 out Video Distributor

· Video input: 1 x 2 pin terminal block
· Built in twisted pair active receiver (TA111VR)
· Dual output: 1 BNC output for local, plus 1 terminal output for remote side
· Transmission range: up to 300 meters work with passive receiver at remote side. up to 1000 meters work with active receiver at remote side

· VIDEO OUTPUT: 1Vp-p¡A75 Ohms (BNC Connector)
· Power Input DC12V
· Power Consumption: 40mA (max)
· Recommend Cable: CAT 5 Cable 4 Pairs (24 AWG)
· Dimension W x H x D mm: 108x76x27
· Material: Metal Black